■ 鋁合金模塊化拼裝結構，觸摸屏 PLC控制，操作界面簡單易懂。

■ 三對毛刷(Φ160 ㎜ )不銹鋼軸頭，上部硬毛刷配置氣缸可單獨提升，特制軟毛刷可洗LOW-E玻璃，普通鍍膜玻璃。

■ 主傳動為斜齒傳動，變頻調速，清洗機毛刷分別由上下兩組電機單獨齒帶傳動，轉速平穩，使用壽命更長。

■ 快速自動厚度調節，升降高度300mm，方便內部保養。

■ 設備配有單獨溫控系統（風加熱及水加熱裝置），風機使用熱風回收系統達到節能，效率高。

■ 可與高速雙邊機，上下片等設備對接，實現自動化生產線。

■ Aluminum alloy assembly structure, touch screen PLC control system, operating interface is simple and easy to understand.

■ Three pairs hair brush(Φ160 ㎜ ) with stainless steel shaft, the up hard hair brush is controlled by pneumatic cylinder and can be lifted up independently, so the soft hair brush can wash the LOW-E glass, common coating film glass.

■ Helical teeth transmission driving system, frequency speed adjustment.

■ The up and lower washing brushes are drive by two groups of independent gear belt system, with steady speed and longer working life.

■ Convenient thickness adjustment, the whole section can hoist 300mm to facilitate inner clean.

■ Can be equipped with air and water heating system.

■ Can connected with high-speed double edging machine, automatic glass loading and unloading system to realize automatic processing.

l三對風刀: 二對特制風刀加一對拼裝式鋁風刀

l二直一斜，風力強，去除厚板玻璃尾部平面水珠效果更佳

l高速15米/分鐘

l3 pairs of air blades, 2 pairs of special designed air blade 1 pair of assemble aluminum air blade

l2 straight 1 inclined air blade structure which greatly improve the working of blow the water at the end corner glass away.

lSpeed up to 15m/min