?

"美氏M6361"酸性硅酮密封膠是一種酸性固化的高性能密封膠:1)固化迅速;2)固化收縮率低;3)在低溫(-45℃)至高溫(+164℃)內保持良好彈性;4)柔軟抗震,耐變形;5)對于多數基材有良好的兼容性;6)用于各類門窗安裝.

說明:

1)施工溫度在5°C~40°C之間;

2)用兩塊布法清潔基材;

3)將膠嘴按需要的大小做45°切斷;

4)將膠打滿接縫處;

5)10分鐘內結皮.?

重要:

1)使用前請做材料相容性測試;

2)不用于銅,鋅和磚石材料;

3)不用于幕墻結構性裝配或表面溫度(45℃)以上的材料;

4)不用于滲出油污或溶劑的材料；

5)在足夠通風條件下使用.

注意:

遠離兒童!

避免接觸眼睛和皮膚!

如有接觸,請用水沖洗;仍然不適的請就醫檢查.

執行標準: GB/T14683-2003.

保質期: 7個月(

?

"MEISHI M6361" acidity silicone sealant is a acidic curing high performance grade silicone sealant:1)Rapid solidification;2)Low shrinkage on curing;3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation;5)Good adhesion to many substrates;6)Applicable to the assembly of various doors and windows.

DIRECTIONS:

1)Construction applicable between 5℃~40℃;

2)Substrates should be solvent cleaned using two clothes method;

3)Cut the nozzle to desired opening at 45°angle ;

4)Fill the joint completely;

5)Formation of skin in 8 minutes.

IMPORTANT:

1)Please do material compatibility testing before use；

2)Not for copper,zinc and stone;

3)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;

4)Incompatible oozing out oily or solvents;

5)Apply in Plenty of air.

PRECAUTIONS:

Keep out of the reach of children!

Avoid contact with eyes and skin!

In case of contact,flush with lot water;If still indisposed,consult a doctor.

STANDARS: GB/T 14683-2003.

STORAGE: 7 Months(

?