“美氏M6478”中性硅酮密封膠是一種中性固化的高性能密封膠:1)不腐蝕基材; 2)固化收縮率低; 3)在低溫(-45℃)至高溫(+164℃)內保持彈性;4)柔軟抗震,耐變形; 5)適合于玻璃,鋁材,石材,混凝土,磚瓦,陶瓷,塑料間的非結構性粘結密封。說明:1)施工溫度在5℃~40℃之間;2)用兩塊布法清潔基材;3)將膠嘴按需要的大小做45°切斷;4)將膠打滿接縫處。重要:1)使用前請做材料相容性測試;2)不用于結構性裝配或表面溫度(45℃)以上的材料;3)不用于滲出油污或溶劑的材料。注意:遠離兒童!避免接觸眼睛和皮膚!如有接觸,請用水沖洗;仍然不適的請就醫檢查。執行標準:GB/T14683-2003保質期:9個月(

“MEISHI M6478”neutral silicone sealant is a neutral cure high perfomance grade silicone sealant: 1)Not corrosion to the materials; 2)Low shrinkage on curing; 3)Keep elastic in low(-45℃) and high(+164℃) temperatures;4)High grade soft,be able to bear oscillation; 5)Suitable for glass,aluminum material,stone,concrete, brick, ceramic, plastic, non-structural bonding and sealing.DIRECTIONS:1)Construcation applycable between 5℃~40℃;2)Substrates should be solvent cleaned using two clothes method;3)Cut the nozzle to desired opening at 45°angle;4)Fill the joint completely.IMPORTANT:1)Please do material compatibility testing before use;2)Do not use in structural applications or where surface temperatures exceed 45℃ for material safety;3)Incompatible oozing out oily or solvents.PRECAUTIONS:Keep out of the reach of children!Avoid contact with eyes and skin!In case of contact,flush with lot water;If still indisposed,consult a doctor.STANDARS: GB/T14683-2003STORAGE: 9 Months(

深圳美氏康寧膠業（MEISHI CORNING）是一家集研制，生產，銷售為一體的硅酮密封粘結產品制造商。公司成立于2000年，是一家正在蒸蒸日上，孜孜以求的企業。工廠擁有現代化的廠房，精良的設備，形成了強大的生產能力。能為客戶提供從高到低不同品質，各種類型的產品。幾年來，公司精心打造了一支的研發隊伍，培養了一批熟練的技術工人，形成了一套完整的質量控制和生產管理體系。從原材料進廠到產品輸出均經過多層次嚴格檢驗，以保證所有產品均符合國家有關部門的相應標準。 Shenzhen Meishi Corning plastic industry (MEISHI CORNING) is a research, production and sales of silicone sealant adhesive manufacturers. Founded in 2000, A thriving business. The factory has a modern plant, Good equipment, Formed a strong production capacity. Able to provide different quality from high to low, all types of products for you. In recent years, the company carefully built an outstanding R & D team to develop a number of skilled workers to form a complete set of quality control and production management system. Products from raw materials to the outputs through multi-level rigorous testing to ensure that all products meet appropriate standards In line with national standards.